what does it take to install a gas fireplace in your home
Fireplace Cost
Fireplace installation costs between $100 and $5,600 depending on the type. The toll to install a gas fireplace is $two,300 to $iv,000, a traditional forest-burning fireplace runs $ane,900 to $three,300, and an electric fireplace costs $100 to $two,200. Edifice a masonry fireplace costs $3,500 to $5,600.
Hither are the average prices installed, which includes the flue, vent, or chimney.
| Fireplace Type | Cost To Install |
|---|---|
| Electric Fireplace | $100 – $ii,200 |
| Wood-Burning Fireplace | $1,900 – $3,300 |
| Gas Fireplace | $2,300 – $iv,000 |
| Masonry Fireplace | $3,500 – $v,600 |
On average, a new metal prefabricated gas or forest-burning fireplace costs $2,900 installed, while an electric fireplace runs $1,200. A masonry fireplace costs an average of $4,900 installed in an existing habitation with a 12' chimney.
| National Average Cost | $ii,415 |
| Minimum Cost | $100 |
| Maximum Cost | $5,600 |
| Average Range | $1,050 to $3,780 |
A fireplace is known for giving the best feeling of home, with a warm and cozy ambiance. Existent manor agents see fireplaces adding anywhere between $1,000 and $4,999 to your domicile'due south value, peculiarly in colder climates. Nosotros're going to compare the pros and cons of each type of fireplace and their costs.
Tabular array of Contents
- Types of Fireplaces
- Pros & Cons
- Cost To Run Per Hour
- Fireplace Installation Cost
- Wood-Burning
- Gas
- Electrical
- Toll To Build A Fireplace
- Adding Inside A Dwelling house
- Build Outdoors
- Install Gas Line
- Labor Costs
- Masonry & Customization
- Wiring
- Additional Costs
- Vented Vs. Ventless Fireplace
- Natural Vents
- Ventless or Vent-Free
- Direct Vents
- Chimney Flue
- Chimney Installation
- Reasons To Install A Fireplace
- Frequently Asked Questions
- Hiring A Fireplace Installer
- Fireplace Installation Nearly Me
Types of Fireplaces
At that place are several unlike types of fuel-powered fireplaces and installations, namely gas, electrical, and wood-called-for, and then the prices differ quite a flake. While one type might exist cheaper to install, another might be cheaper to run over the years and last longer.
With gas fireplaces, you don't accept to worry about getting upward to throw more than wood on a dying fire, while installing a forest-called-for stove or fireplace in your home can provide an additional source of oestrus that is electricity and gas complimentary.
Pros & Cons
| Type | Pros | Cons |
|---|---|---|
| Gas | Depression maintenance, no cleaning required, burns the most efficiently. | Requires gas line installation and ongoing utility costs. |
| Electric | Lowest upfront cost and the everyman price to run per hour. Easy to maintain. | Requires wiring installation and ongoing electricity costs. |
| Wood-called-for | Uses forest logs which lowers energy bills. | Soot buildup occurs and requires frequent cleaning. |
Toll To Run Gas & Electric Fireplaces
The average cost to run a natural gas fireplace is $0.70 per hour, or about $60 per yr, while propane costs $ii.xxx per 60 minutes. The cost to run an electrical fireplace is $0.15 per hr.
| Blazon | Cost To Run Per Hour |
|---|---|
| Natural Gas | $0.seventy |
| Electric | $0.15 |
| Propane | $2.30 |
Fireplace Installation Price
A new gas, wood-called-for, electrical, or masonry fireplace firebox unit costs between $one,100 and $ii,800, or near $1,800 on average. Professional installation and finishing adds $800 to $2,800, or most $two,100 on average, bringing your overall cost to install a fireplace at $1,900 to $5,600. These prices are earlier any veneer, hearth, or mantel is added.
Cost Breakdown To Install A Fireplace
| Type | Material – Firebox Only | Labor – No Flue/Chimney |
|---|---|---|
| Masonry Fireplace | $one,136 – $1,454 | $2,210 – $2,941 |
| Gas Fireplace - vented | $1,085 – $2,861 | $2,500 – $two,822 |
| Forest-Burning Fireplace (nine' – 24' chimney included) | $1,250 – $2,063 | $670 – $1,463 |
| Electric Fireplace | $100 – $2,200 | $0 – $365 |
Wood-Burning Fireplace Installation Cost
The cost to install a woods-burning fireplace ranges from $i,200 to $4,500, which is prefabricated and includes a 9' – 24', 9" chimney. One of the bonuses of a traditional fireplace is that no masonry back up is needed nether the firebox. The chimney is insulated and has a flue, lining, damper, and roof flashing. These are a great option for those looking to cut down on the electricity bills and have admission to an ample amount of wood.
| Size | Average Cost Installed |
|---|---|
| 36" wide with a 9' to 24', 9" chimney | $one,900 – $3,300 |
| 42" wide with a nine' to 24', ix" chimney | $2,050 – $2,530 |
Cost To Convert Gas Fireplace To Wood-Burning
It is often possible to convert a gas fireplace to a wood-burning i for $100 to $300. However, if the fireplace is a nix-clearance or ventless fireplace with no flue to begin with, information technology is highly probable information technology cannot be converted. If it already has a flue, the gas line will have to be capped, gas inserts removed, and the flue changed out past a professional. This is no DIY job because of the danger of smoke inhalation if information technology's not done right.
Cost To Install Gas Fireplace
The cost to install a gas fireplace ranges from $two,280 to $4,030. The labor toll alone for a vented gas fireplace installation ranges from $2,500 to $2,800 while labor for a vent-free fireplace will price about $1,200 less.
The installation cost can cost a lot more if y'all have no existing gas line to the house, but a local gas company might be willing to cover that price to get your business.
The overall maintenance of a gas fireplace is relatively low. There is no soot or ash to scrape out, therefore requiring no cleaning. It burns the most efficiently out of all the choices, heating a room with less energy, and it only costs about $60 a yr to run a gas fireplace.
Also, gas is a much amend choice of fireplace if you live in an earthquake-prone location. Some sample prices for a direct-vent or vent-gratis gas fireplace without labor costs are:
| Model | Type | Boilerplate Toll |
|---|---|---|
| Empire Tahoe Deluxe 36" Direct-Vent NG Millivolt | Direct Vent | $1,563 |
| Majestic Able-bodied 35" Direct Vent Large Gas Insert | Direct Vent | $2,987 |
| Pleasant Hearth 36" Compact Convertible | Ventless | $673 |
| Empire Vent-Free Thermostat Fireplace Insert | Ventless | $1,322 |
| Emberglow Oakwood 22.75" (Propane) | Ventless | $156 |
| Pleasant Hearth 46" (Propane) | Ventless | $i,322 |
Cost to Install a Propane Fireplace
The average cost to install a ventless propane fireplace is $1,200, and the cost to catechumen a gas furnace to a propane furnace is nearly $25 to $100. The difference in price betwixt a gas-fueled and propane-fueled fireplace is in the fuel cost. Less propane is needed to provide the same corporeality of heat every bit gas. Both are considered to burn clean, but natural gas burns cleaner.
Gas Fireplace Cost Per Hour
- Natural gas burns at $0.seventy an hour
- Propane burns at $ii.thirty an hour
Gas Log Installation Toll
Gas log inserts cost $179 to $1,129. The $2,280 to $4,030 price of an installed gas-burning fireplace includes the price of the gas logs or gas inserts. Gas logs are available for vented or vent-free gas fireplaces.
Vent-free gas logs are cheaper and produce the almost heat only release more than carbon monoxide. An oxygen depletion sensor comes with unvented gas logs and will shut the fire off before levels of carbon monoxide get high. Cull based on fuel type, the addition of lava rock cinders, and a remote-command option.
| Model | Average Price |
|---|---|
| ProCom 24" Vent-Costless Natural Gas Log Set with Manual Command | $179 |
| Northern Flame Country Oak Vented Gas Log Set 24" | $395 |
| Napoleon Fiberglow Ceramic Vented Gas Log Set - 24" | $869 |
| NAPOLEON 30" Vent-Free Natural Gas Log Set | $1,129 |
How Much Does Information technology Cost to Catechumen a Wood Fireplace To Gas?
Information technology costs $100 to $300 to convert a gas fireplace to forest. Switching a wood fireplace to a gas insert is $2,280 to $four,030 because a flue has to be built and a gas line installed. A ventless gas fireplace will price about $1,200 less to install.
Electric Fireplace Installation Cost
An electric fireplace costs $100 to $2,200 or more than, and the installation labor ranges from $0 to $365. Labor costs volition just come up if you lot demand to install a new outlet, for about $150, or if information technology needs to sit in or be attached to a wall.
A handyman charges $fifty to $65 per hr with a minimum service fee of $50–$125. Otherwise, you can just plug it in. If you wish to place an electric firebox into a masonry fireplace, you'll shut off the chimney and the damper and add a frame and trim around the new firebox.
| Model | Average Cost |
|---|---|
| Hampton Bay 23" Compact Electric Fireplace | $98 |
| XtremepowerUS 28.5" Embedded Electric Fireplace Insert | $116 |
| NAPOLEON threescore" Wall-Mountain Linear Electric Fireplace | $1,279 |
| NAPOLEON Allure 100" Wall-Mount Electric Fireplace | $ii,199 |
Electric fireplaces are safe and more practical than traditional open-hearth fireplaces. Electrical fireplaces run on 1,500 watts of electricity, which costs $0.15 per hour on average. They require no clearance between combustible materials (similar paneling, walls, or forest) and themselves, because they maintain a absurd outside.
Too, electric fireplaces don't require a chimney or hearth and can add a high aesthetic value to a room. They are better at heating rooms, as their heat does not escape upward a chimney.
Return to Top
Cost To Build A Fireplace
Building a new masonry fireplace costs betwixt $3,500 to $5,600 on average. The cost to install a prefabricated brick fireplace is $ii,000 to $3,000, whereas an authentic stonemason-built brick fireplace can cost $x,000 or more.
| Material | Average Cost |
|---|---|
| Masonry | $3,500 – $5,600 |
| Prefabricated Brick | $ii,000 – $3,000 |
| Authentic Mason-built Brick | $ten,000+ |
A typical wood-called-for masonry fireplace is installed on a 12"-thick concrete foundation in a five-pes space which includes a firebox enclosed in a wall with a fireplace throat and smoke chamber, and it can include a gas valve. Still, prefabricated fireplaces are much cheaper to install and cleaner to run.
Costs To Add Fireplace To A Home
The total cost to add a fireplace ranges from $100 to $5,600 depending on which fuel source y'all select. Of that full toll, the cost to install a fireplace and to purchase the firebox the fire burns inside are two different toll points to consider.
| Factors | Average Toll |
|---|---|
| Gas Fireplace (Firebox - vented) | $1,085 – $2,861 |
| Gas Line Installation | $500 – $2,200 |
| Gas Valve, Log Lighter, and Cardinal Installation | $190 – $250 |
| Electric Prefab Fireplace Torso and Grate | $100 – $2,200 |
| Wiring | $140 – $200 |
| Associates & Customization | $350 – $three,000 |
| Ventilation | $400 – $two,000 |
Do you want a large mantel, elementary mantel shelf, ornate frieze, or inlay brickwork? Is the expanse irregular or difficult to add fittings and moldings to? In that location is also the toll of materials used to assemble the mantel or surrounding molding, like plaster.
- Plaster and frieze will price $13 per linear pes.
- Mantel shelf with custom fitting and installation, $107 per mantel.
- Installing a pine mantel ranges between $1,105 and $3,017 for a more ornate, stained piece.
Cost To Build Outdoor Fireplace
An outdoor fireplace costs $140 to $3,500 or more than before installation. Masonry and chimney construction typically adds $ane,000 to $2,000 to your toll. Indoor and outdoor models are built the aforementioned way, but outdoor models are more than flexible on fireplace codes. Additional charges may come with masonry work used to build a surround structure of the firebox, such every bit a hearth. An outdoor fireplace is an excellent alternative to a firepit.
| Model | Boilerplate Cost |
|---|---|
| Uniflame forty.v" H Black Steel Wood-Burning Outdoor Fireplace | $140 |
| RumbleStone 84" 10 38.5" ten 94.5" Outdoor Stone Fireplace | $2,786 |
| Stone Arch fifty" Stucco Gas Fireplace | $2,999 |
| Cal Flame 48" Propane Gas Outdoor Fireplace in Porcelain Tile | $3,411 |
Indoor-Outdoor Fireplace Cost
An indoor-outdoor fireplace toll depends on your budget, because they can come in any size and at whatever price starting at near $1,900. A trim kit costs $300 to $920. If it's not included in the price, you'll also need to buy a kit which allows for installation on the outside wall and includes a double drinking glass window and a barrier screen. Wiring, connectedness, and installation of a heater in a closed wall costs $141 to $202.
These fireplaces can be installed on exterior walls then they tin can be seen from both inside and outside. The cost is the same as installing an indoor fireplace, but y'all may be quoted a higher estimate than usual for the pigsty that has to be cut to create an opening to the outside. The fashion your home is synthetic will largely determine boosted installation costs.
| Model | Average Cost |
|---|---|
| CLEARion 50 Inch See Thru Electric Fireplace | $ane,889 |
| Superior VRL4543 Ventless See-Through Linear Gas Fireplace - 43" | $two,315 |
| Empire Boulevard Ventless See-Through Gas Fireplace - 60" | $4,166 |
| Fortress See-Through Indoor to Outdoor Gas Fireplace Regal | $seven,899 |
| Napoleon Vector 74 See-Through Gas Fireplace | $11,549 |
Toll To Install Gas Line For Fireplace
The cost to install and run a gas line to a fireplace ranges from $26 to $55 per linear foot, with well-nigh spending $130 to $2,140. If a gas company already installed the main gas line to your dwelling, and then connecting them to a gas fireplace from the meter will be less expensive.
Even if yous accept no connection to the main gas lines, well-nigh gas companies are happy to install access to it if they can gear up a monthly gas service with you. Bringing gas to an upstairs room tin exist a little more expensive, equally there are more linear feet of gas pipe needed. Measure the distance from your gas meter to the location of the new fireplace to gauge the cost to install an interior gas line, which could exist from five' to 50' long.
| Location | Cost Per Linear Pes |
|---|---|
| Gas line installation from interior gas meter to fireplace | $30 – $43 |
| Gas line installation from gas meter to street | $26 – $55 |
| Gas Line Permit | $50 |
Labor Cost To Put In A Fireplace
The labor cost to put in a fireplace ranges from $300 to $3,000, with most homeowners spending $two,100 for both installation and finishing.
| Fireplace Type | Labor Cost |
|---|---|
| Refabricated Metallic Firebox Body | $280 – $360 |
| Wood-called-for Fireplace With Chimney | $670 – $i,460 |
| Masonry Fireplace | $two,210 – $2,940 |
Actress costs may apply to remove an exisiting fireplace, depending on the blazon and the extent of the demolition.
Fireplace Masonry & Customizations Cost
Customizations usually include adding a decorative mantel or brickwork around the opening. Masonry work will be the most expensive customization you lot tin can practice to better the overall aesthetic and is not typically done past the professional installing the firebox.
A pocket-size fireplace hearth is most 4" – 8" thick and usually extends 16" in front of the fireplace with 8" more on each side. A larger fireplace extends approximately xx" in front end and 12" more on each side. To find the square footage around your fireplace, mensurate the space beyond the top of your fireplace (multiply the peak by width) so the space on each side of it. Add together these three numbers together to get the full square footage of the front of your fireplace.
| Customization | Average Cost |
|---|---|
| Brick Veneer Face | $96 per sqft. |
| Cobblestone Veneer Face | $34 per sqft. |
| Limestone Veneer Face or Hearth | $l per sqft. |
| ane ¼" Marble Confront or Hearth | $90 per sqft. |
| Steel bar fireplace grate | $53 – $114 |
| Modern 11" x 77" Pine Mantel | $ane,500 |
Fireplace Wiring
Wiring a fireplace is necessary if you have to plug in an electrical fireplace. If you install a combustion air inlet kit, it will demand to be run to the main control console too.
| Wiring | Average Cost |
|---|---|
| Install a New Outlet | $140 – $165 |
| Install a New Switch | $150 – $200 |
| Additional Wiring | $six – $8 /LF |
Additional Costs
At that place are add-ons and other costs to consider when building your fireplace. For case, you tin purchase a chimney liner kit for $90 to $700 with a selection of some or all the following: liner, flex pipe, cap, top plate, flashing, mortar sleeve.
| Item | Average Toll |
|---|---|
| Fireplace Blower | $40 – $250 |
| Chimney Liner Costs | $30 – $120 per foot |
| Chimney Liner Kit | $ninety – $700 |
| Fireplace Flex Pipe | $1,271 per 25' pipe |
| Fireplace Damper Installation | $107 – $451 |
| Fireplace Glass Door | $124 – $3,217 |
| Old Firebox or Furnace Removal | $fifty – $155 |
| Gas Piping Installation | $30 – $43 /LF |
| Gas Log Lighter | $56 – $75 |
| Gas Valve for Log Lighter | $67 – $88 |
Return to Top
Vented Vs. Ventless Fireplace
On average, a ventilation organisation for a fireplace costs $1,200 installed, with prices ranging from $200 to $3,000 depending on the location of your vent organization and any local regulations. A direct vent is installed in the form of a flue or chimney, unless you're installing a ventless fireplace.
Choosing a proper venting pick is disquisitional to the efficiency and safety of your fireplace. Venting is essential to make clean the fume or polluted air out of your living room. Each manufacturer issues specific venting requirements it has determined based on several factors. Sure types of pipes and vents can only be used on sure parts of the fireplace. If you lot're converting a fireplace, it's likely the old pipes and vents won't exist used at all.
Natural Vents
Natural vents or B-vents require pipes from fireplaces in the dwelling house to leave above the roof. They circulate air from the room for combustion (feeding the fire oxygen), which makes the fire burn more efficiently with the same corporeality of energy. Those fumes or burned air are then circulated exterior, and only some of the rise rut is too sent exterior.
Ventless or Vent-Free
Ventless fireplaces crave no ventilation, and they are less expensive. Rooms are also heated more efficiently since no heat escapes up a vent. With the exclusions of bedrooms and bathrooms, these fireplaces can be installed anywhere in the home.
Nonetheless, they are not as safe equally vented fireplaces considering the air pollutants and combustion levels can build up, peculiarly in a well-insulated home or i with active fans, burning candles, and drafts.
Ventless fireplaces do come with oxygen level sensors that mechanically shut off the organisation before pollutants go as well high, but they are not 100% reliable, and some states will not permit them. If you have animate issues, like asthma, it's not recommended that y'all install this type of system.
Direct Vents
Direct-vent fireplaces pull air to the exterior, keeping your home condom from pollutants. They can either vent horizontally through a wall or vertically through the roof, making their installation versatile and easy to piece of work with. They are the virtually installed ventilation type of fireplace because of their safety in the dwelling house. These vents are best suited for a new home or a home that has been updated to exist airtight.
Chimney Flue Toll
A chimney flue typically costs $1,200 to install on average, with prices ranging from $58 to $lxxx per linear human foot. Even gas-called-for fireplaces need proper ventilation to keep the air quality of your home breathable. Vented gas logs create a little bit of smoke that needs to be released up a flue (chimney). The design of your home and where your fireplace volition go will determine how long the vents should be.
| Item | Boilerplate Price |
|---|---|
| 8" inside bore double wall fireplace flue | $58.lx Per LF |
| 10" inside diameter double wall fireplace flue | $79.50 Per LF |
| Pass flue through ceiling | $198 |
| Flashing and storm collar for roof | $297 – $350 |
| Full (12' 10 8" Flue) | $1,225 |
Chimney Installation Toll
The average cost to build a chimney is $1,000 and $iii,500 or between $100 to $200 per linear foot, depending on the number of flues. A chimney or an opening connected to the exterior of a domicile transfer the fumes exterior. This type of ventilation is called a directly-vent arrangement.
| Blazon | Cost Per Linear Foot |
|---|---|
| Single Flue | $100 – $300 |
| Double Flue | $200 – $400 |
Return to Acme
Reasons To Install A Fireplace
Energy Savings
A fireplace has a high free energy-efficiency compared to an HVAC system. Natural gas burns clean with energy costs at $0.lxx per hour, making information technology an eco-friendly option. A direct-vent gas fireplace has an free energy rating of 60% to 80%, and draws in outside air which keeps the flame burning and gets rid of all the by-product and combustion gases. Wood burning fireplaces are the virtually energy-efficient choice and exercise not crave a fuel source to generate heat other than adding more logs.
Maintenance & Budget
Gas and electric fireplaces are low maintenance, and no annual cleaning is required. It'southward recommended to get a yearly chimney inspection for $125 which covers the venting, airplane pilot light, fan, and burner. For wood-burning fireplaces, information technology typically costs $100 to $200 per year for chimney cleaning.
Domicile & Resale Value
In a recent survey of real estate agents, more than than 83% see fireplaces adding between $i,000 and $4,999 to the domicile'south resale value. This is especially truthful upwards n in colder climates.
Rebates
Some states give taxation deductions or utility bill discounts for having fireplaces in the abode. There are greenbacks incentives and rebates for converting an old wood-called-for fireplace into one that burns clean fuel similar gas. A professional fireplace installer would know what your fireplace qualifies for, and you lot tin can also contact your local free energy board for info.
Render to Top
Frequently Asked Questions
Are Wood-Called-for Fireplaces Permitted in Your Area?
Inquire your local fire department or Homeowners Association (HOA) for edifice code requirements nearly the new construction of a wood-burning fireplace. Some counties only allow fireplace remodels, while others require a fireplace permit to limit the number of new builds per year.
All manufactured wood-called-for fireplaces must encounter EPA PM emission standards as established in 1990. Nigh states prohibit the sale or use of whatsoever woods-burning fireplace that doesn't run across standards. Your state or canton may take No Burn Days—when you will non be able to operate your fireplace on certain days for air quality control.
Tin You Install a Wood-Burning Fireplace in an Existing Home?
Yes, you can install a new wood-burning fireplace in an existing home, every bit long as there is room for the chimney, and no local building codes are restricting the construction.
How Much Does It Cost to Install Fireplace Glass Doors?
The cost of labor for most additions to a fireplace is $70 to $160 an installation. Add that to the cost of the glass doors of your choice to get a reasonable estimate.
How Much Does a Linear Gas Fireplace Cost?
A linear fireplace will price the same as a gas fireplace, $2,280 to $iv,030. These are likewise called rectangular or contemporary fireplaces.
How Much Does It Cost To Install A Gas Fireplace In Basement?
On average, the cost to install a gas fireplace in a basement is $one,705 to $four,291.
Toll of a Free-Standing Gas Fireplace
A free-standing gas fireplace will toll from $ane,705 to $4,291, which includes professional person installation.
How Much Does a Gel Fuel Fireplace Toll?
Gel fuel is used in ventless fireplaces, which tin can be hands installed past a homeowner. The fireplaces range from small tabletop units—the size of a large bowl—with prices starting at $50, going up to $16,000 for larger outdoor units that tin can extend 140 inches wide. The gel fuel comes in canisters, and its cost ranges from less than a dollar for a brusque burn period to $2,600 for up to 180 gallons worth.
How Much Does a Fireplace Inspection Cost?
A fireplace inspection costs $92 to $651, depending on damages and level of filth. An inspection involves checking for buildup and looking at the chimney to see if sweeps are necessary.
Return to Summit
Hiring A Fireplace Installer
Before signing a contract, get 3 to 5 quotes from reputable fireplace installers and select the all-time one. Never select the lowest quote as they may be unlicensed or inexperienced.
- Simply consider quotes from contractors who will come up out to your home to requite an accurate bid.
- Make sure the contractor who licensed, bonded, and insured.
- Check online reviews on HomeGuide and Google.
- Choose a company that'southward been in business for at least five years.
- Choose the best warranty on labor.
- Brand certain the fireplace that has been recommended for your abode is the correct size and BTU (heat) output.
Go complimentary estimates on HomeGuide from trusted fireplace companies:
Get free estimates
Source: https://homeguide.com/costs/fireplace-installation-cost
0 Response to "what does it take to install a gas fireplace in your home"
Post a Comment